Industries Served

Steel plays a foundational role in construction. Hot rolled pickled steel coil is frequently used in structural beams, floor decking, and framing applications due to its strength and load-bearing capacity. Galvanized steel coil offers long-term protection from the elements and is common in roofing, wall systems, and light gauge studs. Cold rolled steel is also supplied for architectural elements and interior components where a smooth surface and tight tolerances are important; it is often painted or coated after fabrication to enhance durability and appearance.

Zeeco supports builders and contractors with coils prepared for fabrication shops and roll-forming operations. Material availability in a range of gauges and finishes make sure that general contractors and commercial builders can match the steel to the structural or architectural need.

Hot rolled pickled and oiled steel is also chosen for welded assemblies where a clean surface finish is preferred, allowing better adhesion of paint or coatings.

Home appliance manufacturers rely on galvanized steel coil for enclosures, door panels, control housing, and interior components. The protective zinc layer helps resist scratches, rust, and staining during daily use. These materials also provide an attractive finish that is easy to paint or powder coat.

Hot rolled pickled and oiled steel is used for precision-formed parts and internal brackets. Its smoother surface helps reduce wear on stamping dies and lowers scrap rates during production. Cold rolled steel is also widely used for internal appliance parts such as brackets, trays, fan housings, and control panel supports, where uncoated steel is later painted or powder-coated to provide corrosion resistance and a clean finish.

With tight tolerances required for appliance manufacturing, Zeeco’s coil slitting services allow producers to work with coil widths that match their forming or stamping lines, reducing waste and improving material flow.

Manufacturers of heating, ventilation, and air conditioning equipment need materials that resist corrosion and provide ease of fabrication. Galvanized steel coil is ideal for ductwork, plenums, and HVAC housings. It resists moisture buildup and oxidation, maintaining strength over time in both residential and commercial systems.

Hot rolled pickled and oiled steel is also favored for its ability to accept coatings and sealants, making it a suitable base for internal parts, brackets, and assembly plates within HVAC units.

Cold rolled steel is commonly used for internal HVAC components such as brackets, trays, and baffles that are uncoated initially but later painted or powder-coated, providing excellent formability and surface finish.

Hot rolled pickled and oiled steel coil, though less common in residential units, can be used in larger commercial HVAC frames or equipment supports. Zeeco supplies the coils cut to appropriate widths and packaged for quick processing.

Agricultural machinery must withstand repeated stress and exposure to outdoor environments. Hot rolled pickled and oiled coil is widely used in the manufacturing of tractor frames, tillage tools, balers, and harvesters. Its toughness and strength make it suitable for heavy-use applications.

For outer panels, protective covers, and equipment housings, galvanized steel coil offers an extra level of defense against moisture and fertilizer exposure, reducing downtime and extending equipment life.

Hot rolled pickled and oiled steel is often chosen for parts that will be welded or machined, as it reduces scale buildup and provides a clean working surface for welders and fabricators.

From control cabinets to industrial panel boards, the electrical sector requires steel that supports precision and safety. Hot rolled pickled and oiled steel is widely used in these applications because its clean surface is easy to powder coat and mark. It forms well, allowing for clean bends and cutouts.

Galvanized steel coil provides rust resistance, making it suitable for outdoor installations or settings with exposure to condensation or dust. These materials are essential for enclosures that protect sensitive electrical systems and wiring.

Cold rolled steel is frequently specified for internal electrical components such as switchboard back plates, control panel internals, and battery enclosures, where corrosion resistance is provided by later coatings or powder coatings.

With custom slitting services, Zeeco can supply the material widths needed for roll-forming or panel punching lines, helping maintain product consistency.

The trailer industry relies on Hot rolled pickled and oiled steel coil for trailer frames, decking, tongue components, and supports. These parts must carry heavy loads, absorb vibration, and stand up to long-term use.

Galvanized steel coil is used for trailer siding, roofing, and guards, protecting them from road salt, weather, and debris. The corrosion-resistant properties reduce maintenance and replacement costs for end users.

Hot rolled pickled and oiled steel plays a role in forming hitches, rails, and braces. With better weldability and surface finish, it provides a strong foundation for structural joints and reinforcements.

Galvanized steel coil is widely used in marine environments because of its resistance to rust caused by saltwater exposure. Whether for ship hulls, railings, stairwells, or dock components, this material helps extend the service life of marine vessels and equipment.

Hot rolled pickled and oiled steel is suitable for use in ship engine rooms, bulkheads, and watertight doors where precision forming is required. The clean surface also helps with welding and paint adhesion in high-moisture areas.

Hot rolled pickled and oiled steel coils find use in structural parts of ships or port equipment, offering strength and support under dynamic load conditions.

Beyond specific industry categories, Zeeco also supports custom fabricators and OEMs who require material that meets a wide range of mechanical and dimensional standards. These businesses may produce anything from industrial shelving and storage racks to HVAC plenum boxes or support brackets.

Hot rolled steel coil provides the strength needed for structural parts. Galvanized steel coil allows for clean, rust-resistant outer surfaces. Pickled steel serves as an excellent choice for parts requiring post-processing such as welding, bending, or coating.

Cold rolled steel is also a key material for custom fabricators and OEMs, valued for its consistent thickness, excellent surface finish, and ease of forming, especially where parts will be painted or powder-coated after fabrication.

With inventory in multiple temper and finishes, Zeeco works with clients to supply the coil width, weight, and steel grade that fits their production equipment and goals.